DARCS(1)

NAME
darcs - an advanced revision control system

SYNOPSIS
darcs command <arguments|[options]>... Where the commands and their respective arguments are darcs help [<darcs_command> [darcs_subcommand]]
darcs add <file|directory> ...
darcs remove <file|directory> ...
darcs move <source> ... <destination>
darcs replace <old> <new> <file> ...
darcs revert [file|directory]...
darcs unrevert
darcs whatsnew [file|directory]...
darcs record [file|directory]...
darcs unrecord
darcs amend-record [file|directory]...
darcs mark-conflicts
darcs tag [tagname]
darcs setpref <pref> <value>
darcs diff [file|directory]...
darcs log [file|directory]...
darcs annotate [file|directory]...
darcs dist
darcs test [[initialization] command]
darcs show contents [file]...
darcs show files [file|directory]...
darcs show index
darcs show pristine
darcs show repo
darcs show authors
darcs show tags
darcs show patch-index-all
darcs show patch-index-files
darcs show patch-index-status
darcs show patch-index-test
darcs pull [repository]...
darcs fetch [repository]...
darcs obliterate
darcs rollback [file|directory]...
darcs push [repository]
darcs send [repository]
darcs apply <patchfile>
darcs get <repository> [<directory>]
darcs put <new repository>
darcs initialize
darcs optimize
darcs repair
darcs convert <source> [<destination>]
darcs rebase pull [repository]...
darcs rebase suspend
darcs rebase unsuspend
darcs rebase obliterate

DESCRIPTION
Darcs is a free, open source revision control system. It is:

•   Distributed: Every user has access to the full command set, removing boundaries between server and client or committer and non-committers.

•   Interactive: Darcs is easy to learn and efficient to use because it asks you questions in response to simple commands, giving you choices in your work flow. You can choose to record one change in a file, while ignoring another. As you update from upstream, you can review each patch name, even the full `diff' for interesting patches.

•   Smart: Originally developed by physicist David Roundy, darcs is based on a unique algebra of patches. This smartness lets you respond to changing demands in ways that would otherwise not be possible. Learn more about spontaneous branches with darcs.

OPTIONS
Different options are accepted by different Darcs commands. Each command's most important options are listed in the COMMANDS section. For a full list of all options accepted by a particular command, run `darcs command --help'.

  Selecting Patches:
The --patches option yields patches with names matching an *extended* regular expression. See regex(7) for details. The --matches option yields patches that match a logical (Boolean) expression: one or more primitive expressions combined by grouping (parentheses) and the complement (not), conjunction (and) and disjunction (or) operators. The C notation for logic operators (!, && and ||) can also be used. - --patches=regex is a synonym for --matches='name regex' - --from-patch and --to-patch are synonyms for --from-match='name... and --to-match='name... - --from-patch and --to-match can be unproblematically combined:
  `darcs changes --from-patch='html.*documentation' --to-match='date 20040212'` The following primitive Boolean expressions are supported: - exact - check a literal string against the patch name. - name - check a regular expression against the patch name. - author - check a regular expression against the author name. - hunk - check a regular expression against the contents of a hunk patch. - comment - check a regular expression against the log message. - hash - match the darcs hash for a patch. - date - match the patch date. - touch - match file paths for a patch. Here are some examples:
    darcs annotate --summary --match 'exact "Resolve issue17: use dynamic memory allocation."'
    darcs annotate --summary --match 'name issue17'
    darcs annotate --summary --match 'name "^[Rr]esolve issue17\>"'
    darcs annotate --summary --match 'author "David Roundy"'
    darcs annotate --summary --match 'author droundy'
    darcs annotate --summary --match 'author droundy@darcs.net'
    darcs annotate --summary --match 'hunk "foo = 2"'
    darcs annotate --summary --match 'hunk "^instance .* Foo where$"'
    darcs annotate --summary --match 'comment "prevent deadlocks"'
    darcs annotate --summary --match 'hash 20040403105958-53a90-c719567e92c3b0ab9eddd5290b705712b8b918ef'
    darcs annotate --summary --match 'date "2006-04-02 22:41"'
    darcs annotate --summary --match 'date "tea time yesterday"'
    darcs annotate --summary --match 'touch src/foo.c'
    darcs annotate --summary --match 'touch src/'
    darcs annotate --summary --match 'touch "src/*.(c|h)"'

COMMANDS
darcs help [<darcs_command> [darcs_subcommand]]
    Without arguments, `darcs help` prints a categorized list of darcs commands and a short description of each one. With an extra argument, `darcs help foo` prints detailed help about the darcs command foo.

  Changing and querying the working copy:
darcs add <file|directory> ...
    Generally a repository contains both files that should be version controlled (such as source code) and files that Darcs should ignore (such as executables compiled from the source code). The `darcs add` command is used to tell Darcs which files to version control. When an existing project is first imported into a Darcs repository, it is common to run `darcs add -r *` or `darcs record -l` to add all initial source files into darcs. Adding symbolic links (symlinks) is not supported. Darcs will ignore all files and folders that look "boring". The `--boring` option overrides this behaviour. Darcs will not add file if another file in the same folder has the same name, except for case. The `--case-ok` option overrides this behaviour. Windows and OS X usually use filesystems that do not allow files a folder to have the same name except for case (for example, `ReadMe` and `README`). If `--case-ok` is used, the repository might be unusable on those systems!
darcs remove <file|directory> ...
    The `darcs remove` command exists primarily for symmetry with `darcs add`, as the normal way to remove a file from version control is simply to delete it from the working tree. This command is only useful in the unusual case where one wants to record a removal patch WITHOUT deleting the copy in the working tree (which can be re-added). Note that applying a removal patch to a repository (e.g. by pulling the patch) will ALWAYS affect the working tree of that repository.
darcs move <source> ... <destination>
    Darcs cannot reliably distinguish between a file being deleted and a new one added, and a file being moved. Therefore Darcs always assumes the former, and provides the `darcs mv` command to let Darcs know when you want the latter. This command will also move the file in the working tree (unlike `darcs remove`), unless it has already been moved. Darcs will not rename a file if another file in the same folder has the same name, except for case. The `--case-ok` option overrides this behaviour. Windows and OS X usually use filesystems that do not allow files a folder to have the same name except for case (for example, `ReadMe` and `README`). If `--case-ok` is used, the repository might be unusable on those systems!
darcs replace <old> <new> <file> ...
    In addition to line-based patches, Darcs supports a limited form of lexical substitution. Files are treated as sequences of words, and each occurrence of the old word is replaced by the new word. This is intended to provide a clean way to rename a function or variable. Such renamings typically affect lines all through the source code, so a traditional line-based patch would be very likely to conflict with other branches, requiring manual merging. Files are tokenized according to one simple rule: words are strings of valid token characters, and everything between them (punctuation and whitespace) is discarded. By default, valid token characters are letters, numbers and the underscore (i.e. `[A-Za-z0-9_]`). However if the old and/or new token contains either a hyphen or period, BOTH hyphen and period are treated as valid (i.e. `[A-Za-z0-9_.-]`). The set of valid characters can be customized using the `--token-chars` option. The argument must be surrounded by square brackets. If a hyphen occurs between two characters in the set, it is treated as a set range. For example, in most locales `[A-Z]` denotes all uppercase letters. If the first character is a caret, valid tokens are taken to be the complement of the remaining characters. For example, `[^:\n]` could be used to match fields in the passwd(5), where records and fields are separated by newlines and colons respectively. If you choose to use `--token-chars`, you are STRONGLY encouraged to do so consistently. The consequences of using multiple replace patches with different `--token-chars` arguments on the same file are not well tested nor well understood. By default Darcs will refuse to perform a replacement if the new token is already in use, because the replacements would be not be distinguishable from the existing tokens. This behaviour can be overridden by supplying the `--force` option, but an attempt to `darcs rollback` the resulting patch will affect these existing tokens. Limitations: The tokenizer treats files as byte strings, so it is not possible for `--token-chars` to include multi-byte characters, such as the non-ASCII parts of UTF-8. Similarly, trying to replace a "high-bit" character from a unibyte encoding will also result in replacement of the same byte in files with different encodings. For example, an acute a from ISO 8859-1 will also match an alpha from ISO 8859-7. Due to limitations in the patch file format, `--token-chars` arguments cannot contain literal whitespace. For example, `[^ \n\t]` cannot be used to declare all characters except the space, tab and newline as valid within a word, because it contains a literal space. Unlike POSIX regex(7) bracket expressions, character classes (such as `[[:alnum:]]`) are NOT supported by `--token-chars`, and will be silently treated as a simple set of characters.
darcs revert [file|directory]...
    The `darcs revert` command discards unrecorded changes the working tree. As with `darcs record`, you will be asked which hunks (changes) to revert. The `--all` switch can be used to avoid such prompting. If files or directories are specified, other parts of the working tree are not reverted. In you accidentally reverted something you wanted to keep (for example, typing `darcs rev -a` instead of `darcs rec -a`), you can immediately run `darcs unrevert` to restore it. This is only guaranteed to work if the repository has not changed since `darcs revert` ran.
darcs unrevert
    Unrevert is a rescue command in case you accidentally reverted something you wanted to keep (for example, typing `darcs rev -a` instead of `darcs rec -a`). This command may fail if the repository has changed since the revert took place. Darcs will ask for confirmation before executing an interactive command that will DEFINITELY prevent unreversion.
darcs whatsnew [file|directory]...
    The `darcs whatsnew` command lists unrecorded changes to the working tree. If you specify a set of files and directories, only unrecorded changes to those files and directories are listed. With the `--summary` option, the changes are condensed to one line per file, with mnemonics to indicate the nature and extent of the change. The `--look-for-adds` option causes candidates for `darcs add` to be included in the summary output. Summary mnemonics are as follows: * `A f` and `A d/` respectively mean an added file or directory. * `R f` and `R d/` respectively mean a removed file or directory. * `M f -N +M rP` means a modified file, with `N` lines deleted, `M`
      lines added, and `P` lexical replacements. * `f -> g` means a moved file or directory. * `a f` and `a d/` respectively mean a new, but unadded, file or
      directory, when using `--look-for-adds`.
      An exclamation mark (!) as in `R! foo.c`, means the hunk is known to
      conflict with a hunk in another patch. The phrase `duplicated`
      means the hunk is known to be identical to a hunk in another patch. By default, `darcs whatsnew` uses Darcs' internal format for changes. To see some context (unchanged lines) around each change, use the `--unified` option. To view changes in conventional `diff` format, use the `darcs diff` command; but note that `darcs whatsnew` is faster. This command exits unsuccessfully (returns a non-zero exit status) if there are no unrecorded changes.

  Copying changes between the working copy and the repository:
darcs record [file|directory]...
    The `darcs record` command is used to create a patch from changes in the working tree. If you specify a set of files and directories, changes to other files will be skipped. Every patch has a name, an optional description, an author and a date. Darcs will launch a text editor (see `darcs help environment`) after the interactive selection, to let you enter the patch name (first line) and the patch description (subsequent lines). The patch name should be a short sentence that concisely describes the patch, such as "Add error handling to main event loop." You can supply it in advance with the `-m` option, in which case no text editor is launched, unless you use the `--edit-long-comment` option. The patch description is an optional block of free-form text. It is used to supply additional information that doesn't fit in the patch name. For example, it might include a rationale of WHY the change was necessary. A technical difference between patch name and patch description, is that matching with the flag `-p` is only done on patch names. Finally, the `--logfile` option allows you to supply a file that already contains the patch name and patch description. This is useful if a previous record failed and left a `darcs-record-0` file. Each patch is attributed to its author, usually by email address (for example, `Fred Bloggs <fred@example.net>`). Darcs looks in several places for this author string: the `--author` option, the files `_darcs/prefs/author` (in the repository) and `~/.darcs/author` (in your home directory), and the environment variables `$DARCS_EMAIL` and `$EMAIL`. If none of those exist, Darcs will prompt you for an author string and write it to `~/.darcs/author`. Note that if you have more than one email address, you can put them all in `~/.darcs/author`, one author per line. Darcs will still prompt you for an author, but it allows you to select from the list, or to type in an alternative. If you want to manually define any dependencies for your patch, you can use the `--ask-deps` flag, and darcs will ask you for the patch's dependencies. A patch with specific dependencies can be empty. The patch date is generated automatically. It can only be spoofed by using the `--pipe` option. If you run record with the `--pipe` option, you will be prompted for the patch date, author, and the long comment. The long comment will extend until the end of file or stdin is reached (ctrl-D on Unixy systems, ctrl-Z on systems running a Microsoft OS). This interface is intended for scripting darcs, in particular for writing repository conversion scripts. The prompts are intended mostly as a useful guide (since scripts won't need them), to help you understand the format in which to provide the input. Here's an example of what the `--pipe` prompts look like:
        What is the date? Mon Nov 15 13:38:01 EST 2004
        Who is the author? David Roundy
        What is the log? One or more comment lines If a test command has been defined with `darcs setpref`, attempting to record a patch will cause the test command to be run in a clean copy of the working tree (that is, including only recorded changes). If the test fails, you will be offered to abort the record operation. The `--set-scripts-executable` option causes scripts to be made executable in the clean copy of the working tree, prior to running the test. See `darcs get` for an explanation of the script heuristic. If your test command is tediously slow (e.g. `make all`) and you are recording several patches in a row, you may wish to use `--no-test` to skip all but the final test. To see some context (unchanged lines) around each change, use the `--unified` option.
darcs unrecord
    Unrecord does the opposite of record: it deletes patches from the repository, without changing the working copy. Deleting patches from the repository makes active changes again which you may record or revert later. Beware that you should not use this command if there is a possibility that another user may have already pulled the patch.
darcs amend-record [file|directory]...
    Amend-record updates a "draft" patch with additions or improvements, resulting in a single "finished" patch. This is better than recording the additions and improvements as separate patches, because then whenever the "draft" patch is copied between repositories, you would need to make sure all the extra patches are copied, too. Do not copy draft patches between repositories, because a finished patch cannot be copied into a repository that contains a draft of the same patch. If this has already happened, `darcs obliterate` can be used to remove the draft patch. Do not run amend-record in repository that other developers can pull from, because if they pull while an amend-record is in progress, their repository may be corrupted. When recording a draft patch, it is a good idea to start the name with `DRAFT:` so that other developers know it is not finished. When finished, remove it with `darcs amend-record --edit-long-comment`. Alternatively, to change the patch name without starting an editor, use the `--name`/`-m` flag:
        darcs amend-record --match 'name "DRAFT: foo"' --name 'foo2' Like `darcs record`, if you call amend-record with files as arguments, you will only be asked about changes to those files. So to amend a patch to foo.c with improvements in bar.c, you would run:
        darcs amend-record --match 'touch foo.c' bar.c It is usually a bad idea to amend another developer's patch. To make amend-record only ask about your own patches by default, you can add something like `amend-record match David Roundy` to `~/.darcs/defaults`, where `David Roundy` is your name.
darcs mark-conflicts
    Darcs requires human guidance to unify changes to the same part of a source file. When a conflict first occurs, darcs will add the initial state and both choices to the working tree, delimited by the markers `v v v`, `=====`, `* * *` and `^ ^ ^`, as follows:
        v v v v v v v
        Initial state.
        =============
        First choice.
        *************
        Second choice.
        ^ ^ ^ ^ ^ ^ ^ However, you might revert or manually delete these markers without actually resolving the conflict. In this case, `darcs mark-conflicts` is useful to show where are the unresolved conflicts. It is also useful if `darcs apply` is called with `--apply-conflicts`, where conflicts aren't marked initially. Unless you use the `--dry-run` flag, any unrecorded changes to the working tree WILL be lost forever when you run this command! You will be prompted for confirmation before this takes place.

  Direct modification of the repository:
darcs tag [tagname]
    The `darcs tag` command names the current repository state, so that it can easily be referred to later. Every *important* state should be tagged; in particular it is good practice to tag each stable release with a number or codename. Advice on release numbering can be found at <http://producingoss.com/en/development-cycle.html>. To reproduce the state of a repository `R` as at tag `t`, use the command `darcs get --tag t R`. The command `darcs show tags` lists all tags in the current repository. Tagging also provides significant performance benefits: when Darcs reaches a shared tag that depends on all antecedent patches, it can simply stop processing. Like normal patches, a tag has a name, an author, a timestamp and an optional long description, but it does not change the working tree. A tag can have any name, but it is generally best to pick a naming scheme and stick to it. The `darcs tag` command accepts the `--pipe` option, which behaves as described in `darcs record`.
darcs setpref <pref> <value>
    When working on project with multiple repositories and contributors, it is sometimes desirable for a preference to be set consistently project-wide. This is achieved by treating a preference set with `darcs setpref` as an unrecorded change, which can then be recorded and then treated like any other patch. Valid preferences are: * test -- a shell command that runs regression tests * predist -- a shell command to run before `darcs dist' * boringfile -- the path to a version-controlled boring file * binariesfile -- the path to a version-controlled binaries file For example, a project using GNU autotools, with a `make test` target to perform regression tests, might enable Darcs' integrated regression testing with the following command:
        darcs setpref test 'autoconf && ./configure && make && make test' Note that merging is not currently implemented for preferences: if two patches attempt to set the same preference, the last patch applied to the repository will always take precedence. This is considered a low-priority bug, because preferences are seldom set.

  Querying the repository:
darcs diff [file|directory]...
    The `darcs diff` command compares two versions of the working tree of the current repository. Without options, the pristine (recorded) and unrecorded working trees are compared. This is lower-level than the `darcs whatsnew` command, since it outputs a line-by-line diff, and it is also slower. As with `darcs whatsnew`, if you specify files or directories, changes to other files are not listed. The command always uses an external diff utility. With the `--patch` option, the comparison will be made between working trees with and without that patch. Patches *after* the selected patch are not present in either of the compared working trees. The `--from-patch` and `--to-patch` options allow the set of patches in the `old' and `new' working trees to be specified separately. The associated tag and match options are also understood, e.g. `darcs diff --from-tag 1.0 --to-tag 1.1`. All these options assume an ordering of the patch set, so results may be affected by operations such as `darcs optimize --reorder`. diff(1) is called with the arguments `-rN`. The `--unified` option causes `-u` to be passed to diff(1). An additional argument can be passed using `--diff-opts`, such as `--diff-opts=-ud` or `--diff-opts=-wU9`. The `--diff-command` option can be used to specify an alternative utility, such as meld (GNOME) or opendiff (OS X). Arguments may be included, separated by whitespace. The value is not interpreted by a shell, so shell constructs cannot be used. The arguments %1 and %2 MUST be included, these are substituted for the two working trees being compared. If this option is used, `--diff-opts` is ignored.
darcs log [file|directory]...
    The `darcs log` command lists the patches that constitute the current repository or, with `--repo`, a remote repository. Without options or arguments, ALL patches will be listed. When given one or more files or directories as arguments, only patches which affect those files or directories are listed. This includes changes that happened to files before they were moved or renamed. When given a `--from-tag`, `--from-patch` or `--from-match`, only changes since that tag or patch are listed. Similarly, the `--to-tag`, `--to-patch` and `--to-match` options restrict the list to older patches. The `--last` and `--max-count` options both limit the number of patches listed. The former applies BEFORE other filters, whereas the latter applies AFTER other filters. For example `darcs log foo.c --max-count 3` will print the last three patches that affect foo.c, whereas `darcs log --last 3 foo.c` will, of the last three patches, print only those that affect foo.c. Three output formats exist. The default is `--human-readable`. You can also select `--context`, which is the internal format (as seen in patch bundles) that can be re-read by Darcs (e.g. `darcs get --context`). Finally, there is `--xml-output`, which emits valid XML... unless a the patch metadata (author, name or description) contains a non-ASCII character and was recorded in a non-UTF8 locale. Note that while the `--context` flag may be used in conjunction with `--xml-output` or `--human-readable`, in neither case will darcs get be able to read the output. On the other hand, sufficient information WILL be output for a knowledgeable human to recreate the current state of the repository.
darcs annotate [file|directory]...
    The `darcs annotate` command provides two unrelated operations. When called on a file, it will find the patch that last modified each line in that file. When called on a patch (e.g. using `--patch`), it will print the internal representation of that patch. The `--summary` option will result in a summarized patch annotation, similar to `darcs whatsnew`. It has no effect on file annotations. By default, output is in a human-readable format. The `--machine-readable` option can be used to generate output for machine postprocessing. The `--creator-hash` option should only be used in combination with a file or directory to be annotated. In this case, the name of that file or directory is interpreted to be its name *at the time it was created* and the hash given along with `--creator-hash` indicates the patch that created the file or directory. This allows you to (relatively) easily examine a file even if it has been renamed multiple times.
darcs dist
    The `darcs dist` command creates a compressed archive (a "tarball") in the repository's root directory, containing the recorded state of the working tree (unrecorded changes and the `_darcs` directory are excluded). If a predist command is set (see `darcs setpref`), that command will be run on the tarball contents prior to archiving. For example, autotools projects would set it to `autoconf && automake`. By default, the tarball (and the top-level directory within the tarball) has the same name as the repository, but this can be overridden with the `--dist-name` option.
darcs test [[initialization] command]
    Run test on the current recorded state of the repository. Given no arguments, it uses the default repository test (see `darcs setpref`). Given one argument, it treats it as a test command. Given two arguments, the first is an initialization command and the second is the test (meaning the exit code of the first command is not taken into account to determine success of the test). If given the `--linear` or `--bisect` flags, it tries to find the most recent version in the repository which passes a test. `--linear` does linear search starting from head, and moving away from head. This strategy is best when the test runs very quickly or the patch you're seeking is near the head. `--bisect` does binary search. This strategy is best when the test runs very slowly or the patch you're seeking is likely to be in the repository's distant past. `--backoff` starts searching from head, skipping further and further into the past until the test succeeds. It then does a binary search on a subset of those skipped patches. This strategy works well unless the patch you're seeking is in the repository's distant past. Under the assumption that failure is monotonous, `--linear` and `--bisect` produce the same result. (Monotonous means that when moving away from head, the test result changes only once from "fail" to "ok".) If failure is not monotonous, any one of the patches that break the test is found at random.
darcs show contents [file]...
    Show contents can be used to display an earlier version of some file(s). If you give show contents no version arguments, it displays the recorded version of the file(s).
darcs show files [file|directory]...
    The `darcs show files` command lists those files and directories in the working tree that are under version control. This command is primarily for scripting purposes; end users will probably want `darcs whatsnew --summary`. A file is "pending" if it has been added but not recorded. By default, pending files (and directories) are listed; the `--no-pending` option prevents this. By default `darcs show files` lists both files and directories, but the alias `darcs show manifest` only lists files. The `--files`, `--directories`, `--no-files` and `--no-directories` modify this behaviour. By default entries are one-per-line (i.e. newline separated). This can cause problems if the files themselves contain newlines or other control characters. To get around this, the `--null` option uses the null character instead. The script interpreting output from this command needs to understand this idiom; `xargs -0` is such a command. For example, to list version-controlled files by size:
        darcs show files -0 | xargs -0 ls -ldS
darcs show index
    The `darcs show index` command lists all version-controlled files and directories along with their hashes as stored in `_darcs/index`. For files, the fields correspond to file size, sha256 of the current file content and the filename.
darcs show pristine
    The `darcs show pristine` command lists all version-controlled files and directories along with the hashes of their pristine copies. For files, the fields correspond to file size, sha256 of the pristine file content and the filename.
darcs show repo
    The `darcs show repo` command displays statistics about the current repository, allowing third-party scripts to access this information without inspecting `_darcs` directly (and without breaking when the `_darcs` format changes). By default, the number of patches is shown. If this data isn't needed, use `--no-files` to accelerate this command from O(n) to O(1). By default, output is in a human-readable format. The `--xml-output` option can be used to generate output for machine postprocessing.
darcs show authors
    The `darcs show authors` command lists the authors of the current repository, sorted by the number of patches contributed. With the `--verbose` option, this command simply lists the author of each patch (without aggregation or sorting). An author's name or email address may change over time. To tell Darcs when multiple author strings refer to the same individual, create an `.authorspellings` file in the root of the working tree. Each line in this file begins with an author's canonical name and address, and may be followed by a comma separated list of extended regular expressions. Blank lines and lines beginning with two hyphens are ignored. The format of `.authorspelling` can be described by this pattern:
        name <address> [, regexp ]* There are some pitfalls concerning special characters: Whitespaces are stripped, if you need space in regexp use [ ]. Because comma serves as a separator you have to escape it if you want it in regexp. Note that `.authorspelling` use extended regular expressions so +, ? and so on are metacharacters and you need to escape them to be interpreted literally. Any patch with an author string that matches the canonical address or any of the associated regexps is considered to be the work of that author. All matching is case-insensitive and partial (it can match a substring). Use ^,$ to match the whole string in regexps Currently this canonicalization step is done only in `darcs show authors`. Other commands, such as `darcs changes` use author strings verbatim. An example `.authorspelling` file is:
        -- This is a comment.
        Fred Nurk <fred@example.com>
        John Snagge <snagge@bbc.co.uk>, John, snagge@, js@(si|mit).edu
        Chuck Jones\, Jr. <chuck@pobox.com>, cj\+user@example.com
darcs show tags
    The tags command writes a list of all tags in the repository to standard output. Tab characters (ASCII character 9) in tag names are changed to spaces for better interoperability with shell tools. A warning is printed if this happens.
darcs show patch-index-all
    The `darcs show patch-index all' command lists all information in the patch index
darcs show patch-index-files
    The `darcs show patch-index files' command lists all current files registered in the patch index
darcs show patch-index-status
    The `darcs show patch-index-status' reports if the patch index is in sync, out of sync, or does not exist
darcs show patch-index-test
    The `darcs show patch-index-test' tests patch index

  Copying patches between repositories with working copy update:
darcs pull [repository]...
    Pull is used to bring changes made in another repository into the current repository (that is, either the one in the current directory, or the one specified with the `--repodir` option). Pull allows you to bring over all or some of the patches that are in that repository but not in this one. Pull accepts arguments, which are URLs from which to pull, and when called without an argument, pull will use the repository from which you have most recently either pushed or pulled. The default (`--union`) behavior is to pull any patches that are in any of the specified repositories. If you specify the `--intersection` flag, darcs will only pull those patches which are present in all source repositories. If you specify the `--complement` flag, darcs will only pull elements in the first repository that do not exist in any of the remaining repositories. See `darcs help apply` for detailed description of many options.
darcs fetch [repository]...
    fetch is used to bring changes made in another repository into the current repository without actually applying them. Fetch allows you to bring over all or some of the patches that are in that repository but not in this one. Fetch accepts arguments, which are URLs from which to fetch, and when called without an argument, fetch will use the repository from which you have most recently either pushed or pulled. The fetched patches are stored into a patch bundle, to be later applied using `darcs apply`.
darcs obliterate
    Obliterate completely removes recorded patches from your local repository. The changes will be undone in your working copy and the patches will not be shown in your changes list anymore. Beware that you can lose precious code by obliterating! One way to save obliterated patches is to use the -O flag. A patch bundle will be created locally, that you will be able to apply later to your repository with `darcs apply`.
darcs rollback [file|directory]...
    Rollback is used to undo the effects of some changes from patches in the repository. The selected changes are undone in your working copy, but the repository is left unchanged. First you are offered a choice of which patches to undo, then which changes within the patches to undo. If you want to record a patch from the rollback you can use revert and unrevert to put aside and restore unrecorded changes of your working copy.
darcs push [repository]
    Push is the opposite of pull. Push allows you to copy changes from the current repository into another repository. If you give the `--apply-as` flag, darcs will use sudo to apply the changes as a different user. This can be useful if you want to set up a system where several users can modify the same repository, but you don't want to allow them full write access. This isn't secure against skilled malicious attackers, but at least can protect your repository from clumsy, inept or lazy users.
darcs send [repository]
    Send is used to prepare a bundle of patches that can be applied to a target repository. Send accepts the URL of the repository as an argument. When called without an argument, send will use the most recent repository that was either pushed to, pulled from or sent to. By default, the patch bundle is sent by email, although you may save it to a file. The `--output`, `--output-auto-name`, and `--to` flags determine what darcs does with the patch bundle after creating it. If you provide an `--output` argument, the patch bundle is saved to that file. If you specify `--output-auto-name`, the patch bundle is saved to a file with an automatically generated name. If you give one or more `--to` arguments, the bundle of patches is sent to those locations. The locations may either be email addresses or urls that the patch should be submitted to via HTTP. If you don't provide any of these options, darcs will look at the contents of the `_darcs/prefs/email` file in the target repository (if it exists), and send the patch by email to that address. In this case, you may use the `--cc` option to specify additional recipients without overriding the default repository email address. If `_darcs/prefs/post` exists in the target repository, darcs will upload to the URL contained in that file, which may either be a `mailto:` URL, or an `http://` URL. In the latter case, the patch is posted to that URL. If there is no email address associated with the repository, darcs will prompt you for an email address. Use the `--subject` flag to set the subject of the e-mail to be sent. If you don't provide a subject on the command line, darcs will make one up based on names of the patches in the patch bundle. Use the `--in-reply-to` flag to set the In-Reply-To and References headers of the e-mail to be sent. By default no additional headers are included so e-mail will not be treated as reply by mail readers. If you want to include a description or explanation along with the bundle of patches, you need to specify the `--edit-description` flag, which will cause darcs to open up an editor with which you can compose a message to go along with your patches. If you want to use a command different from the default one for sending email, you need to specify a command line with the `--sendmail-command` option. The command line can contain some format specifiers which are replaced by the actual values. Accepted format specifiers are `%s` for subject, `%t` for to, `%c` for cc, `%b` for the body of the mail, `%f` for from, `%a` for the patch bundle and the same specifiers in uppercase for the URL-encoded values. Additionally you can add `%<` to the end of the command line if the command expects the complete email message on standard input. E.g. the command lines for evolution and msmtp look like this:
        evolution "mailto:%T?subject=%S&attach=%A&cc=%C&body=%B"
        msmtp -t %< Do not confuse the `--author` options with the return address that `darcs send` will set for your patch bundle. For example, if you have two email addresses A and B: * If you use `--author A` but your machine is configured to send mail from
      address B by default, then the return address on your message will be B. * If you use `--from A` and your mail client supports setting the
      From: address arbitrarily (some non-Unix-like mail clients, especially,
      may not support this), then the return address will be A; if it does
      not support this, then the return address will be B. * If you supply neither `--from` nor `--author` then the return
      address will be B. In addition, unless you specify the sendmail command with `--sendmail-command`, darcs sends email using the default email command on your computer. This default command is determined by the `configure` script. Thus, on some non-Unix-like OSes, `--from` is likely to not work at all.
darcs apply <patchfile>
    The `darcs apply` command takes a patch bundle and attempts to insert it into the current repository. In addition to invoking it directly on bundles created by `darcs send`, it is used internally by `darcs push` and `darcs put` on the remote end of an SSH connection. If no file is supplied, the bundle is read from standard input. If given an email instead of a patch bundle, Darcs will look for the bundle as a MIME attachment to that email. Currently this will fail if the MIME boundary is rewritten, such as in Courier and Mail.app. If the `--reply noreply@example.net` option is used, and the bundle is attached to an email, Darcs will send a report (indicating success or failure) to the sender of the bundle (the `To` field). The argument to noreply is the address the report will appear to originate FROM. The `--cc` option will cause the report to be CC'd to another address, for example `--cc reports@lists.example.net,admin@lists.example.net`. Using `--cc` without `--reply` is undefined. If you want to use a command different from the default one for sending mail, you need to specify a command line with the `--sendmail-command` option. The command line can contain the format specifier `%t` for to and you can add `%<` to the end of the command line if the command expects the complete mail on standard input. For example, the command line for msmtp looks like this:
        msmtp -t %< If gpg(1) is installed, you can use `--verify pubring.gpg` to reject bundles that aren't signed by a key in `pubring.gpg`. If `--test` is supplied and a test is defined (see `darcs setpref`), the bundle will be rejected if the test fails after applying it. In that case, the rejection email from `--reply` will include the test output. A patch bundle may introduce unresolved conflicts with existing patches or with the working tree. By default, Darcs will add conflict markers (see `darcs mark-conflicts`). The `--external-merge` option lets you resolve these conflicts using an external merge tool. In the option, `%a` is replaced with the common ancestor (merge base), `%1` with the first version, `%2` with the second version, and `%o` with the path where your resolved content should go. For example, to use the xxdiff visual merge tool you'd specify: `--external-merge='xxdiff -m -O -M %o %1 %a %2'` The `--allow-conflicts` option will skip conflict marking; this is useful when you want to treat a repository as just a bunch of patches, such as using `darcs pull --union` to download of your co-workers patches before going offline. This can mess up unrecorded changes in the working tree, forcing you to resolve the conflict immediately. To simply reject bundles that introduce unresolved conflicts, using the `--dont-allow-conflicts` option. Making this the default in push-based workflows is strongly recommended. Unlike most Darcs commands, `darcs apply` defaults to `--all`. Use the `--interactive` option to pick which patches to apply from a bundle.
darcs get <repository> [<directory>]
    Get creates a local copy of a repository. The optional second argument specifies a destination directory for the new copy; if omitted, it is inferred from the source location. By default Darcs will copy every patch from the original repository. This means the copy is completely independent of the original; you can operate on the new repository even when the original is inaccessible. If you expect the original repository to remain accessible, you can use `--lazy` to avoid copying patches until they are needed (`copy on demand'). This is particularly useful when copying a remote repository with a long history that you don't care about. The `--lazy` option isn't as useful for local copies, because Darcs will automatically use hard linking where possible. As well as saving time and space, you can move or delete the original repository without affecting a complete, hard-linked copy. Hard linking requires that the copy be on the same filesystem and the original repository, and that the filesystem support hard linking. This includes NTFS, HFS+ and all general-purpose Unix filesystems (such as ext3, UFS and ZFS). FAT does not support hard links. Darcs get will not copy unrecorded changes to the source repository's working tree. It is often desirable to make a copy of a repository that excludes some patches. For example, if releases are tagged then `darcs get --tag .` would make a copy of the repository as at the latest release. An untagged repository state can still be identified unambiguously by a context file, as generated by `darcs changes --context`. Given the name of such a file, the `--context` option will create a repository that includes only the patches from that context. When a user reports a bug in an unreleased version of your project, the recommended way to find out exactly what version they were running is to have them include a context file in the bug report. You can also make a copy of an untagged state using the `--to-patch` or `--to-match` options, which exclude patches *after* the first matching patch. Because these options treat the set of patches as an ordered sequence, you may get different results after reordering with `darcs optimize`, so tagging is preferred.
darcs put <new repository>
    The `darcs put` command creates a copy of the current repository. It is currently very inefficient, so when creating local copies you should use `darcs get . x` instead of `darcs put x`. Currently this command just uses `darcs init` to create the target repository, then `darcs push --all` to copy patches to it. Options passed to `darcs put` are passed to the init and/or push commands as appropriate. See those commands for an explanation of each option.

  Administrating repositories:
darcs initialize
    The `darcs initialize` command turns the current directory into a Darcs repository. Any existing files and subdirectories become UNSAVED changes: record them with `darcs record --look-for-adds`. This command creates the `_darcs` directory, which stores version control metadata. It also contains per-repository settings in `_darcs/prefs/`, which you can read about in the user manual. By default, patches of the new repository are in the darcs-2 semantics. However it is possible to create a repository in darcs-1 semantics with the flag `--darcs-1`, althought this is not recommended except for sharing patches with a project that uses patches in the darcs-1 semantics. Initialize is commonly abbreviated to `init`.
darcs optimize
    The `darcs optimize` command modifies the current repository in an attempt to reduce its resource requirements. By default a single fast, safe optimization is performed; additional optimization techniques can be enabled by passing options to `darcs optimize`. `--reorder` moves recent patches (those not included in the latest tag) to the "front", reducing the amount that a typical remote command needs to download. It should also reduce the CPU time needed for some operations. The `darcs optimize --relink` command hard-links patches that the current repository has in common with its peers. Peers are those repositories listed in `_darcs/prefs/sources`, or defined with the `--sibling` option (which can be used multiple times). Darcs uses hard-links automatically, so this command is rarely needed. It is most useful if you used `cp -r` instead of `darcs get` to copy a repository, or if you pulled the same patch from a remote repository into multiple local repositories. By default patches are compressed with zlib (RFC 1951) to reduce storage (and download) size. In exceptional circumstances, it may be preferable to avoid compression. In this case the `--dont-compress` option can be used (e.g. with `darcs record`) to avoid compression. The `darcs optimize --uncompress` and `darcs optimize --compress` commands can be used to ensure existing patches in the current repository are respectively uncompressed or compressed. Note that repositories in the legacy "old-fashioned-inventory" format have a .gz extension on patch files even when uncompressed. There is one more optimization which CAN NOT be performed by this command. Every time your record a patch, a new inventory file is written to `_darcs/inventories/`, and old inventories are never reaped. If `_darcs/inventories/` is consuming a relatively large amount of space, you can safely reclaim it by using `darcs get` to make a complete copy of the repo. When doing so, don't forget to copy over any unsaved changes you have made to the working tree or to unversioned files in `_darcs/prefs/` (such as `_darcs/prefs/author`).
darcs repair
    The `darcs repair` command attempts to fix corruption in the current repository. Currently it can only repair damage to the pristine tree, which is where most corruption occurs. This command rebuilds a pristine tree by applying successively the patches in the repository to an empty tree. The flag `--dry-run` make this operation read-only, making darcs exit unsuccessfully (with a non-zero exit status) if the rebuilt pristine is different from the current pristine.
darcs convert <source> [<destination>]
    The current repository format is called `darcs-2`. It was introduced in Darcs 2.0 and became the default for new projects in Darcs 2.2. The `darcs convert` command allows existing projects to migrate to this format from the older `darcs-1` format. This command DOES NOT modify the source repository; a new destination repository is created. It is safe to run this command more than once on a repository (e.g. for testing), before the final conversion. WARNING: the repository produced by this command is not understood by Darcs 1.x, and patches cannot be exchanged between repositories in darcs-1 and darcs-2 formats. Furthermore, darcs 2 repositories created by different invocations of this command SHOULD NOT exchange patches, unless those repositories had no patches in common when they were converted. (That is, within a set of repos that exchange patches, no patch should be converted more than once.) Due to this limitation, migrating a multi-branch project is a little awkward. Sorry! Here is the recommended process:
     1. for each branch `foo`, tag that branch with `foo-final`;
     2. merge all branches together (`--allow-conflicts` may help);
     3. run `darcs optimize --reorder` on the result;
     4. run `darcs convert` to create a merged darcs-2 repository;
     5. re-create each branch by calling `darcs get --tag foo-final` on
        the darcs-2 repository; and finally
     6. use `darcs obliterate` to delete the foo-final tags.
darcs rebase pull [repository]...
    Copy and apply patches from another repository, suspending any local patches that conflict.
darcs rebase suspend
    Select patches to move into a suspended patch at the end of the repo.
darcs rebase unsuspend
    Selected patches to restore from a suspended state to the end of the repo.
darcs rebase obliterate
    Obliterate a patch that is currently suspended.

ENVIRONMENT

  HOME and APPDATA
Per-user preferences are set in $HOME/.darcs (on Unix) or %APPDATA%/darcs (on Windows). This is also the default location of the cache.

  DARCS_EDITOR, DARCSEDITOR, VISUAL and EDITOR
To edit a patch description of email comment, Darcs will invoke an external editor. Your preferred editor can be set as any of the environment variables $DARCS_EDITOR, $DARCSEDITOR, $VISUAL or $EDITOR. If none of these are set, vi(1) is used. If vi crashes or is not found in your PATH, emacs, emacs -nw, nano and (on Windows) edit are each tried in turn.

  DARCS_PAGER and PAGER
Darcs will sometimes invoke a pager if it deems output to be too long to fit onscreen. Darcs will use the pager specified by $DARCS_PAGER or $PAGER. If neither are set, `less` will be used.

  DARCS_DONT_COLOR, DARCS_ALWAYS_COLOR, DARCS_ALTERNATIVE_COLOR and DARCS_DO_COLOR_LINES
If the terminal understands ANSI color escape sequences, darcs will highlight certain keywords and delimiters when printing patches. This can be turned off by setting the environment variable DARCS_DONT_COLOR to 1. If you use a pager that happens to understand ANSI colors, like `less -R`, darcs can be forced always to highlight the output by setting DARCS_ALWAYS_COLOR to 1. If you can't see colors you can set DARCS_ALTERNATIVE_COLOR to 1, and darcs will use ANSI codes for bold and reverse video instead of colors. In addition, there is an extra-colorful mode, which is not enabled by default, which can be activated with DARCS_DO_COLOR_LINES

  DARCS_DONT_ESCAPE_TRAILING_SPACES and DARCS_DONT_ESCAPE_TRAILING_CR
By default darcs will escape (by highlighting if possible) any kind of spaces at the end of lines when showing patch contents. If you don't want this you can turn it off by setting DARCS_DONT_ESCAPE_TRAILING_SPACES to 1. A special case exists for only carriage returns: DARCS_DONT_ESCAPE_TRAILING_CR

  DARCS_DONT_ESCAPE_ANYTHING, DARCS_DONT_ESCAPE_ISPRINT, DARCS_DONT_ESCAPE_8BIT, DARCS_DONT_ESCAPE_EXTRA and DARCS_ESCAPE_EXTRA
Darcs needs to escape certain characters when printing patch contents to a terminal. Characters like backspace can otherwise hide patch content from the user, and other character sequences can even in some cases redirect commands to the shell if the terminal allows it. By default darcs will only allow printable 7-bit ASCII characters (including space), and the two control characters tab and newline. All other octets are printed in quoted form (as `^<control letter>` or `\<hex code>`). Darcs has some limited support for locales. If the system's locale is a single-byte character encoding, like the Latin encodings, you can set the environment variable DARCS_DONT_ESCAPE_ISPRINT to 1 and darcs will display all the printables in the current system locale instead of just the ASCII ones. NOTE: This curently does not work on some architectures if darcs is compiled with GHC 6.4 or later. Some non-ASCII control characters might be printed and can possibly spoof the terminal. For multi-byte character encodings things are less smooth. UTF-8 will work if you set DARCS_DONT_ESCAPE_8BIT to 1, but non-printables outside the 7-bit ASCII range are no longer escaped. E.g., the extra control characters from Latin-1 might leave your terminal at the mercy of the patch contents. Space characters outside the 7-bit ASCII range are no longer recognized and will not be properly escaped at line endings. As a last resort you can set DARCS_DONT_ESCAPE_ANYTHING to 1. Then everything that doesn't flip code sets should work, and so will all the bells and whistles in your terminal. This environment variable can also be handy if you pipe the output to a pager or external filter that knows better than darcs how to handle your encoding. Note that all escaping, including the special escaping of any line ending spaces, will be turned off by this setting. There are two environment variables you can set to explicitly tell darcs to not escape or escape octets. They are DARCS_DONT_ESCAPE_EXTRA and DARCS_ESCAPE_EXTRA. Their values should be strings consisting of the verbatim octets in question. The do-escapes take precedence over the dont-escapes. Space characters are still escaped at line endings though. The special environment variable DARCS_DONT_ESCAPE_TRAILING_CR turns off escaping of carriage return last on the line (DOS style).

  DARCS_TMPDIR and TMPDIR
Darcs often creates temporary directories. For example, the `darcs diff` command creates two for the working trees to be diffed. By default temporary directories are created in /tmp, or if that doesn't exist, in _darcs (within the current repo). This can be overridden by specifying some other directory in the file _darcs/prefs/tmpdir or the environment variable $DARCS_TMPDIR or $TMPDIR.

  DARCS_KEEP_TMPDIR
If the environment variable DARCS_KEEP_TMPDIR is defined, darcs will not remove the temporary directories it creates. This is intended primarily for debugging Darcs itself, but it can also be useful, for example, to determine why your test preference (see `darcs setpref`) is failing when you run `darcs record`, but working when run manually.

  DARCS_EMAIL and EMAIL
Each patch is attributed to its author, usually by email address (for example, `Fred Bloggs <fred@example.net>`). Darcs looks in several places for this author string: the `--author` option, the files `_darcs/prefs/author` (in the repository) and `~/.darcs/author` (in your home directory), and the environment variables `$DARCS_EMAIL` and `$EMAIL`. If none of those exist, Darcs will prompt you for an author string and write it to `~/.darcs/author`. Note that if you have more than one email address, you can put them all in `~/.darcs/author`, one author per line. Darcs will still prompt you for an author, but it allows you to select from the list, or to type in an alternative.

  SENDMAIL
On Unix, the `darcs send` command relies on sendmail(8). The `--sendmail-command` or $SENDMAIL environment variable can be used to provide an explicit path to this program; otherwise the standard locations /usr/sbin/sendmail and /usr/lib/sendmail will be tried.

  DARCS_SLOPPY_LOCKS
If on some filesystems you get an error of the kind:
    darcs: takeLock [...]: atomic_create [...]: unsupported operation you may want to try to export DARCS_SLOPPY_LOCKS=True.

  DARCS_SSH
Repositories of the form [user@]host:[dir] are taken to be remote repositories, which Darcs accesses with the external program ssh(1). The environment variable $DARCS_SSH can be used to specify an alternative SSH client. Arguments may be included, separated by whitespace. The value is not interpreted by a shell, so shell constructs cannot be used; in particular, it is not possible for the program name to contain whitespace by using quoting or escaping.

  DARCS_SCP and DARCS_SFTP
When reading from a remote repository, Darcs will attempt to run `darcs transfer-mode` on the remote host. This will fail if the remote host only has Darcs 1 installed, doesn't have Darcs installed at all, or only allows SFTP. If transfer-mode fails, Darcs will fall back on scp(1) and sftp(1). The commands invoked can be customized with the environment variables $DARCS_SCP and $DARCS_SFTP respectively, which behave like $DARCS_SSH. If the remote end allows only sftp, try setting DARCS_SCP=sftp.

  SSH_PORT
If this environment variable is set, it will be used as the port number for all SSH calls made by Darcs (when accessing remote repositories over SSH). This is useful if your SSH server does not run on the default port, and your SSH client does not support ssh_config(5). OpenSSH users will probably prefer to put something like `Host *.example.net Port 443` into their ~/.ssh/config file.

  HTTP_PROXY, HTTPS_PROXY, FTP_PROXY, ALL_PROXY and NO_PROXY
If Darcs was built with libcurl, the environment variables HTTP_PROXY, HTTPS_PROXY and FTP_PROXY can be set to the URL of a proxy in the form
    [protocol://]<host>[:port] In which case libcurl will use the proxy for the associated protocol (HTTP, HTTPS and FTP). The environment variable ALL_PROXY can be used to set a single proxy for all libcurl requests. If the environment variable NO_PROXY is a comma-separated list of host names, access to those hosts will bypass proxies defined by the above variables. For example, it is quite common to avoid proxying requests to machines on the local network with
    NO_PROXY=localhost,*.localdomain For compatibility with lynx et al, lowercase equivalents of these environment variables (e.g. $http_proxy) are also understood and are used in preference to the uppercase versions. If Darcs was not built with libcurl, all these environment variables are silently ignored, and there is no way to use a web proxy.

  DARCS_PROXYUSERPWD
If Darcs was built with libcurl, and you are using a web proxy that requires authentication, you can set the $DARCS_PROXYUSERPWD environment variable to the username and password expected by the proxy, separated by a colon. This environment variable is silently ignored if Darcs was not built with libcurl.

  DARCS_GET_FOO and DARCS_APPLY_FOO
When trying to access a repository with a URL beginning foo://, darcs will invoke the program specified by the DARCS_GET_FOO environment variable (if defined) to download each file, and the command specified by the DARCS_APPLY_FOO environment variable (if defined) when pushing to a foo:// URL. This method overrides all other ways of getting `foo://xxx` URLs. Note that each command should be constructed so that it sends the downloaded content to STDOUT, and the next argument to it should be the URL. Here are some examples that should work for DARCS_GET_HTTP:
    fetch -q -o -
    curl -s -f
    lynx -source
    wget -q -O - Apart from such toy examples, it is likely that you will need to manipulate the argument before passing it to the actual fetcher program. For example, consider the problem of getting read access to a repository on a CIFS (SMB) share without mount privileges:
    export DARCS_GET_SMB='smbclient -c get'
    darcs get smb://fs/twb/Desktop/hello-world The above command will not work for several reasons. Firstly, Darcs will pass it an argument beginning with `smb:`, which smbclient does not understand. Secondly, the host and share `//fs/twb` must be presented as a separate argument to the path `Desktop/hello-world`. Thirdly, smbclient requires that `get` and the path be a single argument (including a space), rather than two separate arguments. Finally, smbclient's `get` command writes the file to disk, while Darcs expects it to be printed to standard output. In principle, we could get around such problems by making the variable contain a shell script, unfortunately, Darcs splits the command on whitespace and does not understand quotation or escaping. Therefore, we instead need to put commands in separate, executable scripts. Continuing our smbclient example, we create an executable script `~/.darcs/libexec/get_smb` with the following contents:
    #!/bin/bash -e
    IFS=/ read host share file <<<'${1#smb://}'
    smbclient //$host/$share -c 'get $file -' And at last we can say
    export DARCS_GET_SMB=~/.darcs/libexec/get_smb
    darcs get smb://fs/twb/Desktop/hello-world The APPLY command will be called with a darcs patchfile piped into its standard input.

  DARCS_CONNECTION_TIMEOUT
Set the maximum time in seconds that darcs allows and connection to take. If the variable is not specified the default are 30 seconds. This option only works with curl.

FILES

  _darcs/prefs/binaries
This file contains a list of extended regular expressions, one per line. A file path matching any of these expressions is assumed to contain binary data (not text). The entries in ~/.darcs/binaries (if it exists) supplement those in this file. Blank lines, and lines beginning with an octothorpe (#) are ignored. See regex(7) for a description of extended regular expressions.

  _darcs/prefs/boring
This file contains a list of extended regular expressions, one per line. A file path matching any of these expressions will be filtered out during `darcs add', or when the `--look-for-adds' flag is passed to `darcs whatsnew' and `record'. The entries in ~/.darcs/boring (if it exists) supplement those in this file. Blank lines, and lines beginning with an octothorpe (#) are ignored. See regex(7) for a description of extended regular expressions.

BUGS
At http://bugs.darcs.net/ you can find a list of known bugs in Darcs. Unknown bugs can be reported at that site (after creating an account) or by emailing the report to bugs@darcs.net.

SEE ALSO
The Darcs website provides a lot of additional information. It can be found at http://darcs.net/

LICENSE
Darcs is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2, or (at your option) any later version.